Rubber And Plastic Testing Instruments

Product Details:

Our company has been acknowledged for providing Tensile Strength Tester for Rubber and Plastic to the clients.

Additional Information:

• Item Code: TTM500
• Port of Dispatch: Delhi-India
• Production Capacity: 200 Units per Month
• Delivery Time: Ready Stock
• Packaging Details: Wooden Packing

Product Details:

UL 94 Flammability Tester: 
As per Standard: UL–94, ASTM D 635
Chamber Size: 125 x 65 x 130 cm
Gas Pressure Gauge: 0 to 30 PSI
Digital Timer: 0 to 999 seconds
Gas Flow Meter Range : 0 to 150ml/min.
Front cover of Tuff Glass
Fume Exhaust
Illumination inside Chamber
Power: 220V AC 50 Hz

Product Details:

We are One of the leading Manufacturers and Exporters of Rubber Strength Checking Machine ASTM D412.

Product Details:

Multi cell Ageing Oven is used to determine change in properties of PVC and Rubber material at particular temperature and time. In Multi cell ageing Oven individual samples are aged in separate cells in presence of air and preventing any contamination from adjacent samples through the migration volatile products which can be found in many rubber & PVC compounds. Rubber and PVC samples has to retain all its physical properties for it has to used in certain application and environment even after ageing the sample at desired temperature and time.

Features:

• Individual temperature Controller & Air inlet for all the chambers
• The casing consists of mild steel, painted with powder coated paint.
• Solid state relay for safe control
• Flow meters with needle valves, for setting the air exchange rate.
• Cooling channels in the casing for low surface temperature
• Temperature controlled cooling fan for the electronics cabinet
• Run-time meter (Hour Totalizer)

Related Standards:

• BS 903 Part A19, BS 6746 (1976),
• It confirms to IS 3400 (Part IV) 1978
• ASTM D 573 and ISO 188

Product Details:

We are Manufacturer and Exporter of Rubber Tensile Strength Tester, Tensile Property of any type of Rubber can be check by these Rubber Tensile Strength Tester. We are Rubber Tensile Strength Tester manufacturer in Delhi and Suppliying to Ludhiana, Punjab, Ambala, Ahmadabad, Surat, Kanpur, Jaipur, Jodhpur, Kolkata, Patna, Guwahati, Indore, Bhopal, Lucknow, Hyderabad, Bangalore, Chennai, Coimbatore, Salem, Kerala, Pune, Daman, Haridwar, Gurgaon, Ghaziabad, Noida and other cities in India and universe.

Product Details:

Multi cell Ageing Oven is used to determine change in properties of PVC and Rubber material at particular temperature and time. In Multi cell ageing Oven individual samples are aged in separate cells in presence of air and preventing any contamination from adjacent samples through the migration volatile products which can be found in many rubber & PVC compounds. Rubber and PVC samples has to retain all its physical properties for it has to used in certain application and environment even after ageing the sample at desired temperature and time.

Product Details:

Additional Information:

• Delivery Time: 7 days
• Packaging Details: Wooden Packing

Product Details:

De-mattia Flex tester is used for checking the resistance of vulcanized rubber or synthetic elastomers to cut growth. The rubber materials forms crack when subjected to repeat flexing or bending under specified conditions continuously. Cracks develops in part of surface where stress is developed during flexing or if part initially contains cracks to extend in direction perpendicular to the stress.

Related Standards:

• ASTM D430-2012, ASTM D813-2014, IS 3400(Part-7), ISO 3400(Part-8)-2012

Additional Information:

• Item Code: DMF700
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Delhi
• Production Capacity: 150 Machines per month
• Delivery Time: 7 days
• Packaging Details: Wooden Box

Product Details:

Notch Cutter:
Notch Cutter is used to prepare sample for Izod and Charpy Impact Tester. This nothc cutter is used for polymer samples.

Additional Information:

• Delivery Time: 10 Working Days
• Packaging Details: Wooden Box

Product Details:

Product Details:

We are the leading and prominent Manufacturer and Supplier of Transparency Tester.

Additional Information:

• Item Code: TT800
• Port of Dispatch: Delhi
• Production Capacity: 300 Machines / month
• Delivery Time: 10 days
• Packaging Details: Corrugated Box Packing

Product Details:

DIN Abrasion tester allows you to measure the abrasion resistance of rubbers (vulcanized thermo-set rubbers and thermoplastic elastomers) that are subject to abrasive/frictional wear in their actual service, such as tyre, conveyor drive belts, and shoe soles.

Standard:

•  IS 3400 (Part 3) – 1987: Methods of Test for Vulcanized Rubbers Part 3: Abrasion

Product Details:

Features:

• Available in Chest / Upright models.
• Outer body is made of mild steel duty painted.
• Inside chamber is made of Stainless Steel. The advanced refrigeration system is used.
• Extra thick insulation effectively reduces loss of cold air.
• Fitted with Microprocessor Based Digital Indicator - cum - Controller.
• Inside Temperature ranging ambient to - 40° C can be set freely.
• Digital temperature display.
• Adjustable shelves are convenient to place articles.
• Heavy Duty base and foot for long life & durability.
• Cooling coils are placed between foamed -in- place PUF insulated and inner side of Stainless Steel
• Chamber eliminating any chances of Frost Formation on the evaporator which lead to choking
• of Compressor / Condensing Unit.
• Useful low-temperature quick freezing and string of Vaccines.
• Biological and Medical specimens, Blood Components and general laboratory freezing applications.

Product Details:

Top Load Tester With Variable Speed Drive (Digital Model)
We are manufacture of Top Load Tester with variable Speed Drive, used to determine strength of Pet Bottles and Containers.