|Minimum Order Quantity||1 Set|
|Power||220V AC 50Hz|
Spring for dampening shock with a maximum deflection of 6.00 at 50%, 12” (30.5cm) in length, 1” (2.5cm) in diameter, center rod 0.5” (1.3cm) in diameter, and a maximum load of 240 lbs (110kg). Spring rate is 7.0kg/cm
Steel tubing, where spring is housed.
Handle Jerk Tester may either be mechanically-driven.
Jerk cycle stroke, up or down, must be 4.5” (11.5cm) with a tolerance of ± 0.5” (± 1.3cm)
Jerk Speed : 10 to 100 Jerks/Minutes (Variable)
Jerk Length: 6 Inches to 12 Inches (Adjustable)
Digital Pre-set Counter: 999999 Counts
Motor: 1/2 hp, single phase, 1425 rpm
Power: 220 V-AC 50 Hz